Black Cat Speed Oil (Premium Fingerboard Bearing Lubricant)

£ 6.93
(No reviews yet) Write a Review
Adding to cart… The item has been added

Black Cat Speed Oil!

Premium Fingerboard Bearing Lubricant!

Designed specifically for Fingerboarding! Keeps your bearings rolling smoothly, and helps protect them from moisture and rust!

Small applicator tip allows for accurate placement. 

To use: Put 1-2 drops on each bearing. Put wheels back on trucks and slowly move the wheels to work the lubricant into the bearing.

It is best to have the wheels removed from the trucks, and set of a flat surface with a paper towel underneath while applying oil.

If you want, you can clean your wheels and bearings before lubricating. Then best way to clean them is to place your wheels in a small container with a small amount of isopropyl alcohol (rubbing alcohol). Let them sit for a 2-4 minutes and swirl them around every minute or so. Remove them and dab them dry with paper towel. Place them on a paper towel to dry for at least 20 minutes. Then apply oil as mentioned above. 

Disclaimer: These are only suggestions for oiling and cleaning. These suggestions are to be used at your own risk. These methods will work with most professional fingerboard wheels, but some wheels could possibly be made with materials that have not been tested with isopropyl alcohol and bearing oil.

Black Cat Speed Oil should only be applied to bearings. Do not eat or drink Black Cat Speed Oil.

“Grip It And Rip It!”